Yamaha MCP1 MCP1 Installation Manual - Page 10
Function tree
View all Yamaha MCP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Function tree If you long-touch (more than two seconds) the home switch when the home page or another page is displayed, you'll move to the utility page. The utility page contains the following function tree. Utility page LCD Brightness LCD Contrast LED Brightness Settings IP Setting Unit ID Initialize Version Alert • LCD Brightness Adjusts the brightness of the display backlight. Higher numbers increase the brightness. • LCD Contrast Adjusts the contrast of the display. Higher numbers increase the contrast. • LED Brightness Adjusts the brightness of the switches. Higher numbers increase the brightness. • Settings Moves to the settings page. After synchronizing with MTX-MRX Editor, it will be necessary to enter the PIN code. • IP Setting Selects either PC or UNIT ID as the method of specifying the MCP1's IP address. In the case of PC, use MTX-MRX Editor to specify the IP address. In the case of UNIT ID, the IP address will be 192.168.0.UNIT ID. After selecting PC or UNIT ID, touch the return switch to move to the confirmation screen and automatically restart. • Unit ID Specifies the MCP1's UNIT ID. The range of this setting is 01 through FE. If IP Setting is UNIT ID, make settings so that there is no conflict with the IP address of another device. After specifying UNIT ID, touch the return switch to move to the confirmation screen and automatically restart. • Initialize Initializes the MCP1. • Version Display the firmware version of MCP1. • Alert Display the alert number which has occurred current. 10 MCP1 Installation Manual