Yamaha MCP1 MCP1 Installation Manual - Page 12

Power-on the PSE., Verify that the MCP1 starts.

Get Yamaha MCP1 PDF manuals and user guides View all Yamaha MCP1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installation 2. Connect the cable to the MCP1. To the NETWORK port on the back of the MCP1, connect the cable that extends from the PSE. 3. Fit the tabs of the mounting plate into the square holes of the MCP1. MCP1 4. While pressing the unit, use the included screws with washers to secure the unit in four locations from the side. 5. Power-on the PSE. NOTE Do not attach the side panel yet. If there is a problem with connections, removing the side panel might damage the side panel or the wall. 6. Verify that the MCP1 starts. If it starts, the PSE and the MCP1 are correctly connected. 7. Attach the side panels to the left and right sides of the MCP1. Attach them so that they click into place. Side panels Next, specify the UNIT ID. 12 MCP1 Installation Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
Installation
12
MCP1 Installation Man
u
al
2.
Connect the cable to the MCP1.
To the NETWORK port on the
b
ack of the MCP1, connect the ca
b
le that extends from the
PSE.
3.
Fit the tabs of the mounting plate into the square holes of the MCP1.
4.
While pressing the unit, use the included screws with washers to secure the unit in
four locations from the side.
5.
Power-on the PSE.
6.
Verify that the MCP1 starts.
If it starts, the PSE and the MCP1 are correctly connected.
7.
Attach the side panels to the left and right sides of the MCP1.
Attach them so that they click into place.
Next, specify the UNIT ID.
NOTE
Do not attach the side panel yet. If there is a pro
b
lem
w
ith connections, remo
v
ing the side panel might
damage the side panel or the
w
all.
MCP1
Side panels