Yamaha MCS-1330 Owner's Manual - Page 16

SYSTEM OPERATIONS SYSTEM OPERATIONS Follow the procedure below to select an input source and adjust the sound settings on the system. ON/STANDBY, OFF PURE DIRECT VOLUME 3 Press one of the input selection keys (or rotate INPUT on the front panel) to select the desired input source. ON/STANDBY OFF PHONES ON/STANDBY OFF USB INPUT PURE DIRECT TUNER PRESET MIN MAX 4 Start playback on the selected source component or select a radio station. For information on the disc/USB device playback, see page 14, and for information on tuning, see page 17. INPUT VOLUME 5 Press VOL +/- (or rotate VOLUME on the front panel) to adjust the volume to the desired output level. (standby/on) Input selection keys VOL +/- iPod CD USB FM/AM PHONO AUX PRESET TUNING VOL VOL PURE DIRECT TONE BALANCE DISPLAY DIMMER SLEEP PURE DIRECT MUTE TONE/BALANCE / MUTE ■ To adjust the audio quality 1 Press TONE/BALANCE to select BASS, TREBLE, or BALANCE. 2 To adjust the setting, press or . BASS: Adjusts the low frequency response. TREBLE: Adjusts the high frequency response. BALANCE: Adjusts the volume level of each left and right speaker channel. ■ Pure Direct mode The Pure Direct mode shuts down the tone control circuitry and front panel display, allowing you to enjoy pure high-fidelity sounds. Press PURE DIRECT (or PURE DIRECT on the front panel) to turn on the Pure Direct mode. The PURE DIRECT indicator lights up, and the front panel display goes off. Basic system operations 1 Press ON/STANDBY, OFF on the front panel of the receiver and the CD player. 2 Press (standby/on) to turn on the receiver. Depending on the input mode of the receiver, the CD player also turns on by the system control connection (see page 9). The front panel display lights up. Notes • If you carry out operations while the Pure Direct mode is turned on, the front panel display lights up briefly to acknowledge the command. • While the Pure Direct mode is turned on, neither BASS, TREBLE, nor BALANCE is available. To turn off the Pure Direct mode Press PURE DIRECT again so that PURE DIRECT indicator turns off and the front panel display lights up. ■ Muting the sound (MUTE) Press MUTE to turn off the sound. MUTE ON appears on the front panel display. To restore the sound, press MUTE again or press VOL +/-. 12 En