Yamaha MCS-1330 Owner's Manual - Page 21
FM/AM TUNING, Automatic tuning, Manual tuning, Automatic preset tuning (FM only)
View all Yamaha MCS-1330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
FM/AM TUNING There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 30 stations. For Asia and Central/South America models only You may need to set the tuner frequency step according to the frequency spacing in your area. Press ON/STANDBY, OFF on the front panel of the receiver while pressing and holding TUNER PRESET d on the front panel of the receiver to turn on the receiver. Each time you set the tuner frequency spacing, the following setting switches. • AM10/FM100: for Central and South America • AM9/FM50: for all other areas (default) Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. Automatic preset tuning (FM only) Follow the procedure below to preset radio stations automatically. TUNER OPERATIONS iPod CD USB FM/AM FM/AM PHONO AUX PRESET TUNING MEMORY REPEAT RANDOM TUNING / iPod MENU SEL FM/AM iPod CD USB FM/AM PHONO AUX PRESET TUNING MEMORY REPEAT RANDOM iPod MENU SEL MEMORY 1 Press FM/AM (or rotate INPUT on the front 1 Press FM/AM (or rotate INPUT on the front panel) to set the receiver to the FM or AM mode. panel) to set the receiver to the FM mode. 2 Press and hold TUNING / for more than 2 seconds to begin automatic tuning. When the receiver is tuned into a station, the TUNED indicator lights up and the frequency of the received station is shown in the front panel display. • Press d to tune into a lower frequency. • Press u to tune into a higher frequency. Manual tuning If the signal received from the station you want to select is weak, tune into it manually. 1 Press FM/AM (or rotate INPUT on the front panel) to set the receiver to the FM or AM mode. 2 Press TUNING / to tune into the desired station manually. 2 Press and hold MEMORY for more than two seconds. The PRESET indicator flashes in the front panel display and starts presetting stations automatically. After searching all the frequencies, stops automatically. • Auto Preset starts at the lowest frequency toward the highest frequency. • The receiver automatically applies a preset number to each detected station. • To cancel, press MEMORY. Notes • You can preset up to 30 stations. • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. 17 En English