Yamaha MCS-1330 Owner's Manual - Page 17

BASIC OPERATIONS ■ To use the ECO mode of the CD player This mode reduces the power consumption during the standby mode. Even if the USB device is connected to the USB port of the CD player, the USB device cannot be charged when the CD player is in standby mode and ECO mode is ON. Press ON/STANDBY, OFF while pressing and holding of the CD player to turn on the CD player. Each time you turn on the CD player by press ON/STANDBY, OFF while pressing and holding of the CD player, ECO ON or ECO OFF appears on the front panel display alternately. Changing the brightness of the front panel display Follow the procedure below to change the brightness of the receiver's and CD player's front panel display. VOL TONE BALANCE DISPLAY DIMMER SLEEP PURE DIRECT MUTE DIMMER SYSTEM OPERATIONS Press SLEEP repeatedly to select the desired duration. Each time you press the key, the duration changes as follows. The SLEEP indicator lights up in the front panel display. 120min. 90min. 60min. 30min. OFF y • The sleep timer is canceled if you set the receiver to the standby mode. • If you press SLEEP while the sleep timer is set, the remaining time appears in the front panel display. To cancel the sleep timer Press SLEEP repeatedly to select "OFF". To use headphones You can connect your headphones to the PHONES jack on the front panel of the receiver. The sound from the speakers and the subwoofer stops. Press DIMMER. You can choose your desired brightness of the front panel display between normal (bright), mid dim, and dim. Setting the sleep timer The sleep timer sets the system to the standby mode after the specified time elapses. VOL TONE BALANCE DISPLAY DIMMER SLEEP PURE DIRECT MUTE SLEEP ON/STANDBY OFF PHONES English 13 En