Yamaha MCX-C15 MCXSP10 Manual - Page 20
CLIENT CONFIGURATION, BEFORE USING THE MusicCAST SYSTEM, Upgrading the MusicCAST system firmware
UPC - 027108920016
View all Yamaha MCX-C15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CLIENT CONFIGURATION BEFORE USING THE MusicCAST SYSTEM Upgrading the MusicCAST system firmware After installation of the MCX-C15 is complete, you must upgrade the MusicCAST system firmware on the MCX-1000 (hereafter, "the server") using the Upgrade CD-ROM (MusicCAST Software Version Up Disc Vol. 2.1 Including MCX-C15 Connectivity) provided with the MCX-C15 (hereafter, "the client"). CAUTION If the MusicCAST firmware is not upgraded, your client may not function correctly. Notes • Before upgrading the MusicCAST system firmware, be sure to stop playback on all MusicCAST clients connected to the server. • For information on function upgrades for the server, see the Version Upgrade Manual Vol. 2 available on the Owner's Manual CD-ROM provided with the client. • If an MCX-A10 client (wireless/wired type) is connected to the MusicCAST system, it must also be upgraded. For details, see the Version Upgrade Manual Vol. 2 available on the Owner's Manual CD-ROM provided with the client. Server operation: 1 Press TOP MENU on the server. 2 Press u / d to choose "System Setup" and press SELECT. 3 Press u / d to choose "System Utilities" and press SELECT. 4 Press u / d to choose "System Update" and press SELECT. The System Update screen appears. 5 Press OPEN/CLOSE to open the disc tray, and insert the Upgrade CD-ROM (MusicCAST Software Version Up Disc Vol. 3). 6 Press OPEN/CLOSE to close the disc tray. The server automatically checks the content of the upgrade CD-ROM, and the message "Update CD is ready" appears on the on-screen display. 7 Press SELECT. The message "READING" appears on the on-screen display. After the upgrade CD-ROM is read, the message "UPDATE OK" appears in the lower left corner of the screen. 8 Press OPEN/CLOSE to open the disc tray and remove the upgrade CD-ROM, then press STANDBY/ON. The MusicCAST server switches to standby mode. 9 Press STANDBY/ON once again to turn on the server. The upgrade process is complete. Notes • If the message "Update CD is ready" does not appear on the display, press OPEN/CLOSE to eject the upgrade CD-ROM and reload it in the disc tray. If the message does not appear after reloading the CD-ROM, contact the store of purchase or your nearest YAMAHA dealer. • Depending on the version currently installed on your server and MCX-A10 client, you may need to upgrade the MusicCAST system firmware more than once. 19