Yamaha MLC-200 MLC-200 Installation Guide - Page 4

Items necessary only for setup Windows computer MTX-MRX Editor MRX7-D setup file ML Config Tool Dante Controller Use to specify settings during setup. A computer with an RJ-45 connector and running Windows 10, Windows 8.1 or Windows 7 is required. Use to transfer the MRX7-D setup file data to MRX7-D when specifying settings during setup. Install this application on a Windows computer. For details on the installation and settings, refer to the MRX Setup Manual. This file provides the settings for the Music Laboratory System. One file per MRX7-D used is required. This software automatically configures the audio network connection between the MRX7-Ds and MLA-200s. Install this software on a Windows computer. Use to change the audio network setup manually (for special settings) and to check the status of the system Workflow Follow the workflow below to build and set up the Music Laboratory System. 1. Trial setup 2. Setting up the wireless access point (DHCP server) 3. Setting up MLA-200s 4. Setting up MRX7-Ds 5. Setting up the audio network 6. Setting up ML Touch 7. Connecting audio devices 8. Operation check 9. Installing the MLA-200 onto the instrument 10. Final operation check 4 - MLC-200 Installation Guide