Yamaha MOX8 Reference Manual - Page 147
Utility Mode, F5] USB I/O, SustainPedal Foot Switch Sustain Pedal Select
UPC - 086792950907
View all Yamaha MOX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE SustainPedal (Foot Switch Sustain Pedal Select) Determines which model of an optional Foot Switch connected to the FOOT SWITCH [SUSTAIN] jack is recognized. When the FC3 is used: When you connect an optional FC3 (equipped with the half-damper feature) for producing the special "halfdamper" effect (as on a real acoustic piano), set this parameter to "FC3 (Half on)." If you don't need the halfdamper feature or want to disable it while still using an FC3, set this parameter to "FC3 (Half off)." When the FC4 or FC5 is used: Select "FC4/5." The FC4 and FC5 are not equipped with the half-damper feature. Settings: FC3 (Half on), FC3 (Half off), FC4/5 NOTE Note that this setting is not necessary when controlling the half-damper feature via Control Change messages from an external MIDI device to the instrument. Utility Mode [F1] GENERAL [F2] VOICE [F2] SEQ [F3] VCE A/D [F4] CTL ASN [F5] USB I/O [F6] MIDI Utility Job [F5] USB I/O Mode Determines the audio input/output connections. The following three settings are available. Settings: VST, 2StereoRec, 1StereoRec VST The audio signal from A/D INPUT [L]/[R] jacks is output to the "USB 1/2" channels of the USB TO [HOST] jack. Also, the audio signal from the tone generator is output to the "USB 3/4" channels of the USB TO [HOST] jack. This mode is for using the 2 stereo channels (4 channels) as the output channels. When using the MOX6/ MOX8 Editor VST, set this parameter to "VST." 2StereoRec........ The audio signal from A/D INPUT [L]/[R] jacks is output to the "USB 1/2" channels of the USB TO [HOST] jack. Also, the audio signal from the tone generator is output to the "USB 1/2" channels or the "USB 3/4" channels of the USB TO [HOST] jack. The output channels for the audio signal from the A/D INPUT [L]/[R] is fixed, but the output channels for audio signal from the tone generator can be selected for each part. The output channel for each part is selected in "USB OUTPUT SELECT" of Performance Common Edit (page 61) or Mixing Common Edit (page 116). NOTE In the Voice mode, the output channel for audio signal from the tone generator is fixed to "USB 3/4." 1StereoRec........ The audio signal from the A/D INPUT [L]/[R] jacks and the tone generator are output together to the "USB 1/2" channels of the USB TO [HOST] jack. This mode is for using the 1 stereo channels (2 channels) as output channels. DirectMonitorSw A/D In&Part (Direct Monitor Switch A/D Input & Part) Determines whether or not the audio signal which is output to the external device via the "USB 1/2" channels also sounds from this instrument (Direct Monitoring). When this is set to "on," the audio signal which is output via the "USB 1/ 2" channels is also output to the OUTPUT [L/MONO]/[R] jacks and [PHONES] jack. The audio signal output to "USB 1/2" channels varies depending on the "Mode" setting. When "Mode" is set to "VST," "DirectMonitorSw A/D In" is indicated in this parameter. Settings: off, on NOTE When the maximum number of output channels for USB is set to 2 channels, "Mode" is fixed to "1StereoRec." For details, see the [SF1] OUT CH display (page 148). MOX6/MOX8 Reference Manual 147