Yamaha MOXF8 Reference Manual - Page 14
Arpeggio related settings, Turning Arpeggio playback on/off, Using the knobs to control Arpeggios
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Arpeggio related settings There are several methods for triggering and stopping the Arpeggio playback. In addition, you can set whether or not SFX sounds and special Accent Phrases are triggered along with the normal sequence data. This section covers the Arpeggio related parameters which can be set in the Voice, Performance and Mixing modes. Turning Arpeggio playback on/off The following three settings are available for turning the Arpeggio playback on/off. To play the Arpeggio only when the note is pressed: To continue the Arpeggio even if the note is released: To toggle the Arpeggio playback on/off whenever the note is pressed: Set the "Hold" parameter to "off" and the "TriggerMode" parameter to "gate." Set the "Hold" parameter to "on" and the "TriggerMode" parameter to "gate." Set the "TriggerMode" parameter to "toggle." The "Hold" parameter can be set to either "on" or "off." NOTE For the displays including the "Hold" and "TriggerMode" parameters, see MAIN display and PLAY FX display of the Arpeggio Edit for Voice mode (page 28), Performance mode (page 58), and Song/Pattern mode (page 83). NOTE When receiving the MIDI sustain message (control change #64) with "Arp Sw" set to "on," you can obtain the same result by setting "Common Switch" and "Part Switch" to "on." Using the knobs to control Arpeggios When the ARP lamp is turned on by pressing the Knob Function 2 button a few times, you can use knobs 5 - 8 to control Arpeggio playback. Try this out and listen for the changes in the sound. For details regarding the effect of the knobs 5 - 8, see "Knob Functions" of the Voice mode (page 54). Press this button a few times so that the lamp lights Basic Structure Functional blocks Tone Generator block A/D Input block Sequencer block Arpeggio block Controller block Effect block Internal memory Reference Voice mode Performance mode Song mode Pattern mode Mixing mode Master mode Remote mode Utility mode Quick setup File mode Using iOS Applications Appendix MIDI Arpeggio functions controlled via the knobs Accent Phrase Accent Phrases are composed of sequence data included in some Arpeggio types, sounding only when you play notes at a velocity higher (stronger) than that specified in the Accent Velocity Threshold parameter. If it is hard to play at velocities necessary to trigger the Accent Phrase, set the "AccntVelTh" (Accent Velocity Threshold) parameter to a lower value. NOTE For the displays including the "AccntVelTh" parameters, see PLAY FX display of the Arpeggio Edit for Voice mode (page 28), Performance mode (page 58), and Song/Pattern mode (page 83). NOTE For information on Arpeggio types that use this function, refer to the "Arpeggio Type List" in the "Data List" PDF document. MOXF6/MOXF8 Reference Manual 14