Yamaha MOXF8 Reference Manual - Page 151
Quick Setup, F1] SETUP
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Quick Setup Using Quick Setup can instantly call up appropriate sequencer-related panel settings by selecting convenient preset setups, allowing you to simultaneously and instantly set a variety of important sequencer-related parameters. Operation Press the [QUICK SETUP] button. Quick Setup [F1] SETUP [F2] AUDIO [F3] MIDI [F1] SETUP This display determines the six Quick Setup settings. This display consists of two pages. Three Quick Setup settings are shown in each page. Use the cursor [V]/[E] buttons to switch between the pages. After completing the settings as desired, select the particular Quick Setup you want to use and then press the [ENTER] button to execute the setup. NOTE Holding the [QUICK SETUP] button and pressing the appropriate [A] (1) - [F] (6) buttons can also execute the corresponding Quick Setup. NAME Determines the name for each Quick Setup. AUDIO Selects the audio setting for each Quick Setup. Each audio setting ("Config1" - "Config6") can be edited in the [F2] AUDIO display. Settings: Config1 - Config6 MIDI Selects the MIDI setting for each Quick Setup. Each MIDI setting ("Config1" - "Config6") can be edited in the [F3] MIDI display. Settings: Config1 - Config6 The default settings for Quick Setups 1 - 6 are as follows. Quick Setup 1 (DAW Rec) "Audio" = "Config2" Use this setting when recording the signals from the tone generator and the A/D INPUT [L]/[R] jacks separately to DAW software, and playing the signals from the OUTPUT [L/MONO]/[R] jacks directly. Mode DirectMonitorSw A/D In DirectMonitorSw Part 2StereoRec on on "MIDI"="Config1" Use this setting when recording this instrument's performance (not including Arpeggio data) to the DAW software. LocalCtrl MIDI Sync ClockOut ArpOutSw KBDTransCh TrIntSw TrExtSw off auto off all off 1 all on all on Quick Setup 2 (Arp Rec) "Audio"="Config2" This setting is same as the Quick Setup 1. "MIDI"="Config2" Use this setting when recording this instrument's performance including Arpeggio data to the DAW software. Keep in mind that this is for recording Arpeggios for which "KeyMode" is set to "sort" or "thru." LocalCtrl on MIDI Sync auto ClockOut off ArpOutSw all on KBDTransCh off TrIntSw all on TrExtSw all off MOXF6/MOXF8 Reference Manual 151