Yamaha MY8-LAKE MY8-LAKE Owners Manual - Page 16
Levels Screen, a module icon.
View all Yamaha MY8-LAKE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
available audio source to any available output destination. The orange numbered blocks show which module output is routed to which of the currently selected "Destination" outputs. The currently displayed audio "Source" defaults to show the number of "Module Outputs" channels listed on the left and the visible audio "Destination" defaults to display the "Host" returns. The currently displayed view can be changed by tapping the appropriate left or right arrows beneath the "Source" and "Destination" labels. NOTE Tap an orange numbered button to disconnect that source/destination routing only (turns blue); tap a blue numbered button to patch the source to the destination. The Disconnect All button can be used to disconnect all outputs for the displayed source/destination matrix. 4. Make any changes as required, then tap the blue arrow at the bottom right of the screen to close the Output Configuration screen. NOTE You can also close the screen by pressing , then pressing to return to the Home screen. Levels Screen The Levels screen provides access to controls for gain, delay, LimiterMax, input mixer, mutes and polarity adjustments. This section describes various example scenarios to highlight key functionality. 1. Tap the [Home] button, then tap a module icon. If a submenu is not selected, tapping a module icon provides a shortcut to the EQ, Levels and HPF/LPF or XOVER screens for the selected module. 2. Tap the [Levels] tab at the top left of the screen (if not already selected) then tap the red [Output MUTED] button to unmute the Mesa module output. NOTE Mesa EQ modules do not have a separate module input mute. Input Router and Input Mixer mutes and connectivity can be reviewed by tapping the associated magnifying glass icon shown below. 3. Check any associated mute and level settings in the MY8-LAKE host device. Assuming there is an audio signal passing from the host device into the module, the screen will look similar to that shown below after the input has been unmuted. 16 MY8-LAKE Owner's Manual