Yamaha MY8-LAKE MY8-LAKE Owners Manual - Page 17

NOTE The Levels screen always displays active RMS & Peak metering for the input and output channels on the selected module. The fader positions and associated values change as each level type is selected (Gain, Delay, LimiterMax etc.). 4. Tap the [LimiterMax] button to display a submenu containing additional options for RMS and peak limiter controls. NOTE • The MaxRMS Level, MaxRMS Corner, MaxRMS Attack, MaxRMS Release and MaxPeak Level controls can be used to set independent peak and RMS output limiters as required for your application. • These limiter levels are specified in dB units. Yamaha presets for Installation series loudspeakers are tuned assuming 26 dB amp gain, and the "Analog Output Reference" in the I/O Config screen is set to +24 dBu by default for the MY8-LAKE (which is the case for most of Yamaha consoles). However, the limiter levels should be adjusted according to the specific output devices, amplifiers and your particular applications. For use with +18 dBu maximum output devices such as DM2000, for example, you will need to change the setting of the Analog Output Reference. 5. Tap the [LimiterMax EXIT] button to return to the top level menu. 6. To change polarity, tap the [Enable Polarity] button, then tap a polarity button (located to the right of the associated channel's mute button). 7. To label a channel, tap the [Label Channel] button, then tap a channel label button. Enter a new name, then tap [OK] (or press ). NOTE • The mute status text is removed from the mute button and mute functionality is temporarily disabled. • The channel number is appended automatically and does not need to be included in the text label. 8. Tap the [Label Channel] button again to exit channel labeling and enable mute functionality again. NOTE The Meter Options submenu includes various other metering options and functionality, some requiring Designer Mode activation before the functions are displayed. For further information on Designer Mode and more detailed Levels screen functionality, refer to the Lake Controller Operation Manual. MY8-LAKE Owner's Manual 17