Yamaha NX-B150 NX-B150 Owners Manual - Page 15
device, or cannot, pair with the connection
View all Yamaha NX-B150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Troubleshooting ■ Bluetooth Problem Cannot make this unit pair with the connection device, or cannot establish a connection. No sound is produced or the sound is interrupted during playback. Cause Solution A pairing operation was not done within about 5 minutes Perform the pairing operation within about 5 minutes on the after pressing and holding (Bluetooth). connection device. (☞ page 12) The connection device does not support A2DP. Pair with a device that supports A2DP. There is a device (microwave oven, wireless LAN, etc.) that Place this unit apart from such devices. outputs signals in the 2.4 GHz frequency band nearby. Another device is already connected to this unit. Disable the current Bluetooth connection. (☞ page 13) The pairing information is stored on the connection device Delete the pairing information on the connection device, but has been deleted from this unit. and then pair with this unit again. (☞ page 12) The Bluetooth function is disabled on the connection device. Enable the Bluetooth function on the connection device. This unit has not been registered to the Bluetooth device list Perform the pairing operation again. (☞ page 12) on the connection device. The Bluetooth connection of this unit and the connection Reestablish a Bluetooth connection. (☞ page 13) device has been disabled. There is a device (microwave oven, wireless LAN, etc.) that Place this unit apart from such devices. outputs signals in the 2.4 GHz frequency band nearby. This unit is not set as an output destination on the connection device. Set this unit as an output destination on the connection device. 15 En