Yamaha PF-500 Owner's Manual - Page 15
Turning the power - power supply
View all Yamaha PF-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Before Using the PF-500 Turning the power on 1. Connect the power cable. First insert the plug of the power cable into the [AC INLET] on the left side panel, then plug the other end of the cable into the proper AC outlet on the wall. 1 AC INLET 2 L/L+RAUX IN R AC INLET L/L+R AUX R OUT PEDAL AUX PEDAL L LEVEL FIXED R MIDI IN OUT PHONES THRU POONWER OFF MIHDIOPSCT-2SMEaLcECUSTB TO HOST USB (The shape of plug differs 240V depending on locale.) 220V 110V 130V VOLTAGE SELECTOR WARNING! Make sure your PF-500 is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard! Use only the AC power cord supplied with the PF-500. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! The type of AC power cord provided with the PF-500 may be different depending on the country in which it is purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the plug provided with the PF-500. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. 2. Turn on the power to the PF-500. Press the [POWER] switch located on the left side panel to turn on the power. • The screen located in the center of the front panel lights up. L/L+RAUX IN R AC INLET L/L+R AUX R OUT PEDAL AUX PEDAL L LEVEL FIXED R MIDI IN OUT PHONES THRU POONWER OFF MIHDIOPSCT-2SMEaLcECUSTB TO HOST USB A POWER ON OFF B NO YES [POWER] C D When you turn on the power to the PF-500, a voice name appears on the screen. Press the [POWER] switch again to turn off the power to the PF-500. PF-500 15