Yamaha PF-500 Owner's Manual - Page 51
Connections - speaker
View all Yamaha PF-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Connections Connectors CAUTION Before connecting the PF-500 to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. 1 AUX IN L/L+R R L/L+R 2 AUX OUT R L LEVEL FIXED R 3 PHONES POWER ON OFF AC INLET PEDAL AUX PEDAL IN 45 MIDI HOST SELECT TO HOST MIDI PC-2 Mac USB USB OUT THRU 6 7 89 1 AUX IN [R], [L/L+R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the PF500's speakers. Refer to the diagram below and use audio cables for connection. CAUTION When the PF-500's AUX IN jacks are connected to an external device, first turn on the power to the external divice, then to the PF-500. Reverse this order when you turn the power off. PF-500 AUX IN L/L+R R phone plug (standard) AUX IN audio cable Plug shape depends on the divece. AUX OUT Tone Generator TIP The PF-500's [MASTER VOLUME] dial setting affects the input signal from the AUX IN jacks, but the [REVERB], [CHORUS], and BRILLIANCE [MELLOW] [BRIGHT] (page 28) settings do not. TIP If you connect the PF-500 to a monaural device, use only the AUX IN [L/L+R] jack or AUX OUT [L/L+R] jack. PF-500 51