Yamaha PSR-S770 PSR-S970/PSR-S770 Owners Manual - Page 89
Setting Up for Using a Microphone/Guitar, Press the [MIC SETTING/ VOCAL HARMONY] PSR-S970 or
View all Yamaha PSR-S770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5 (If necessary, turn on the microphone.) Adjust the [GAIN] knob on the rear panel while singing into the microphone or playing the guitar. Adjust the [GAIN] knob so that the SIGNAL lamp lights in green. Make sure that the lamp does not light in orange or red, since this indicates that the input level is too high. NOTE You can also see the input level on the MIC/GUITAR SETTING display called up by the [MIC SETTING/VOCAL HARMONY] (PSR-S970) or [MIC SETTING] (PSR-S770) button. Microphone/Guitar Input - Using a Microphone or Guitar with the Instrument - Disconnecting the microphone/guitar 1. Set the [GAIN] knob to the minimum position. 2. Disconnect the microphone/guitar from the [MIC/GUITAR INPUT] jack. Setting Up for Using a Microphone/Guitar 1 Connect the microphone/guitar to the instrument (page 88). 2 Press the [MIC SETTING/ VOCAL HARMONY] (PSR-S970) or [MIC SETTING] (PSR-S770) button to call up the MIC/GUITAR SETTING display. 3 5 4 NOTE Settings on the MIC/GUITAR SETTING display (with the exception of the EQ/ CMP settings) can be memorized to the Registration Memory (page 85). 8 3 Press the [A] (MIC/GUITAR) button to set it to ON. This lets you hear the input sound from the instrument when you talk/sing into the microphone or play the guitar. 4 If necessary, press the [C] (EFFECT TYPE) button to call up the EFFECT page of the MIXING CONSOLE display and select the effect type. NOTE For the microphone/guitar sound, the effect block should be set to DSP4. For details on the MIXING CONSOLE display, refer to the Reference Manual on the website, Chapter 9. NEXT PAGE PSR-S970/S770 Owner's Manual 89