Yamaha QS1-MC QS1-MC Owners Manual Image - Page 24
Meters/Millimeters, PI0A.
View all Yamaha QS1-MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
20 Chapter 4 - Windows Eq. Com The Common window provides access to common functions. Note: Refer to the device's operating manualfor afull explanation of the commonfunctions. 1. To open the Common window, select a device icon in the Device window, and choose Eq. Com (Command-M) from the Window menu. The Common window appears. This is the DEQ5 and DEQ5E Common window, Device 01.1 Common Left Channel Right Channel Hum Cancel 0 Ruto O Manual Hum Cancel 0 Ruto O Manual 8 Frequency 50 . Threshold -75 1: Frequency 50 Threshold -75 Polarity Delay Units Delay M Rtt. In Out ® Normal O Reverse 0 Milliseconds o Meters/Millimeters o Feet/Inches 0.021 0 D 0.0 8 M FIT T: Polarity Delay Units Delay l] Rtt. In Out 0 Normal O Reverse 0 Milliseconds O Meters/Millimeters O Feet/Inches 0.021 it). 0 0.0 It 0 PI0A. and this is the YDG2030 and YDP2006 Common window, which does not have the Hum Cancel and Polarity functions. - - - Device @1.2 Common Left Channel Right Channel Delay Delay Units Delay 0 Rt. In O On 0 Off Delay C) Milliseconds Delay Units O Meters/Millimeters o Feet/Inches ft 0.031 Delay 1:1 CI MI 0.0 Rtt. In O On 0 Off 0 Milliseconds O Meters/Millimeters O Feet/Inches 0.031 0 0.0 : Left channel functions appear on the left-hand side. Right channel functions on the right-hand side. Several Common windows can be open simultaneously. To close a Common window, click the window's close box. Common window functions are: Hum Cancel: this is used to set the Hum Cancel function to Auto or Manual and set the Frequency and Threshold. Click the up/down arrows to set the Frequency and Threshold. Polarity: these buttons are used to set the output polarity to Normal or Reverse. Delay Units: these buttons are used to set the delay units. The device will not use a new setting until the delay time is adjusted. Delay: this is used to set the delay time. Drag the slider, or click the up/down arrows to set it. Att.: these are used to set the amount of input and output attenuation. Drag a slider, or click the up/down arrows to set them. A setting of "--" means infinity (OO). Yamaha QS1-MC