Yamaha QY100 Owner's Manual - Page 134

The Pan Pots, The Volume Faders, fader level. The graphic fader will move to the corresponding posi

Page 134 highlights

The Song Voice Mode s NOTE • In any QY100 mode, the micro keyboard or an external MIDI keyboard plays the voice assigned to the currently selected track. A MIDI keyboard will also play the voice assigned to a track with the same number as the external keyboard's MIDI transmit channel unless the "ECHO BACK" parameter (page 248) is set to "Rec Monitor". • If you're playing the micro keyboard, use the octave keys to access the full range of instruments in each drum or effects kit. • See the Data List for a complete list of note assignments (i.e. which drum instruments and SFX sounds are assigned to which notes) for all drum and SFX kits. q The Pan Pots Like the pan pots on a mixing console, the VOICE mode pan pots can be used to position the sound of the corresponding track anywhere from left to right in the stereo sound field. Position the cursor at the pan pot, then use the [-1/NO] and [+1/YES] buttons to set the pan position. The graphic pan pot will rotate to the corresponding position. The pan positions also have numeric values (1 through 63) that appear at the top of the display: "Center" is center, "Left 63" is full left, and "Right 63" is full right. There's also a "Random" setting in which the pan position is set randomly. q The Volume Faders Each track has a graphic volume "fader" that can be set to produce the best "mix" (balance) between the various voices. Position the cursor at a fader, then use the [-1/NO] and [+1/YES] buttons or the SHIFT-Number entry method (page 34) to set the fader level. The graphic fader will move to the corresponding position (higher for higher volume, and lower for lower volume). The fader positions also have numeric values (000 through 127) that appear in the upper right corner of the display: "000" is minimum volume (no sound) and "127" is maximum volume. The default setting is "100" for all tracks. The leftmost "mst" fader is a "master" fader which can be used to adjust the overall volume level, while the "pat" fader independently controls the level of the pattern track. 134

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292

134
The Song Voice Mode
The Pan Pots
Like the pan pots on a mixing console, the VOICE mode
pan pots can be used to position the sound of the corresponding
track anywhere from left to right in the stereo sound
eld. Posi-
tion the cursor at the pan pot, then use the [-1/NO] and [+1/YES]
buttons to set the pan position. The graphic pan pot will rotate to
the corresponding position. The pan positions also have numeric
values (1 through 63) that appear at the top of the display:
Cen-
ter
is center,
Left 63
is full left, and
Right 63
is full right.
There
s also a
Random
setting in which the pan position is set
randomly.
The Volume Faders
Each track has a graphic volume
fader
that can be set to
produce the best
mix
(balance) between the various voices.
Position the cursor at a fader, then use the [-1/NO] and [+1/YES]
buttons or the SHIFT-Number entry method (page 34) to set the
fader level. The graphic fader will move to the corresponding posi-
tion (higher for higher volume, and lower for lower volume). The
fader positions also have numeric values (000 through 127) that
appear in the upper right corner of the display:
000
is minimum
volume (no sound) and
127
is maximum volume. The default
setting is
100
for all tracks. The leftmost
mst
fader is a
master
fader which can be used to adjust the overall volume
level, while the
pat
fader independently controls the level of
the pattern track.
NOTE
In any QY100 mode, the micro keyboard or an external MIDI keyboard
plays the voice assigned to the currently selected track. A MIDI key-
board will also play the voice assigned to a track with the same number
as the external keyboard’s MIDI transmit channel unless the “ECHO
BACK” parameter (page 248) is set to “Rec Monitor”.
If you’re playing the micro keyboard, use the octave keys to access the
full range of instruments in each drum or effects kit.
See the Data List for a complete list of note assignments (i.e. which
drum instruments and SFX sounds are assigned to which notes) for all
drum and SFX kits.