Yamaha QY100 Owner's Manual - Page 251

Utility Functions To transmit (dump) song and/or pattern data to an external device, first select the UTILITY Bulk Dump mode. ;;;; Move the cursor to the upper parameter and use the [-1] and [+1] buttons to select "Song" if you want to save the data for one song or all songs, "Style" if you want to save the data for one style or all styles, or "All" if you want to save all songs, styles, and system setup data including all amp simulator setups. If you select "Song", move the cursor to the song number parameter and select a song number (01 ... 20), or "All" to save all songs. If you select "Style", move the cursor to the style number parameter and select a style number (U01 ... U64), or "All" to save all styles. Remember all 6 variation patterns(Intro, Main A/B, Fill AB/BA and Ending) included in one style will be saved at one time. When the parameters have been set as required, press [ENTER]. "Are You Sure?" will appear on the display. Press [+1/YES] to go ahead with the bulk dump operation, or [-1/NO] to cancel. "Completed !" will appear when the transmission is finished. q Bulk Reception of Song & Pattern Data If no other operation is currently in progress (recording, for example) the QY100 will automatically receive bulk song and pattern data transmitted from a compatible external device. If you are using the QY100's MIDI connectors rather than the TO HOST connector, make sure that the MIDI OUT of the external device is connected to the MIDI IN of the QY100. Select the QY100 SONG play mode when receiving one or all song bulk data, and select the PATTERN play mode when receiving one or all style bulk data. "All" data, including all songs, styles and system setup 251