Yamaha R-N803 R-N803/R-N803D Owner s Manual - Page 22
Share Setting, WirelessWAC - firmware
View all Yamaha R-N803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting to network ■ Connecting with the wired router Connecting using the DHCP server function of the router You can connect to the network by simply making a wired LAN connection (p. 14) Note • You can configure the network parameters (such as IP address) in "IP Address" (p. 49) in the "Setup" menu. • If you want to use a wired LAN connection when a wireless connection has been made, set "Connection" (p. 48) in the "Setup" menu to "Wired". ■ Connecting without a wired router or wireless router (access point) Connecting wirelessly to a mobile device (Wireless Direct) Connect wirelessly with Wireless Direct (p. 19) Note When the unit is connected to the network with Wireless Direct, it cannot connect to any other wireless router (access point). To play back contents from the Internet or update the unit's firmware via the network, connect this unit to a network with a wired router or wireless router (access point). Sharing the iOS device setting You can easily setup a wireless connection by applying the connection settings on iOS devices (iPhone/iPad/iPod touch). Before proceeding, confirm that your iOS device is connected to a wireless router (access point). MEMORY PRESET Cursor keys B / C ENTER SETUP ENTER HOME RETURN SETUP VOLUME OPTION NOW PLAYING MUTE RETURN Note • If you set up a wireless connection with this method, all the network settings will be initialized. • This configuration does not work if the security method of your wireless router (access point) is WEP. In this case, use other connection method. 1 Press SETUP. 2 Use the cursor keys (B / C) to select "Network" and press ENTER. Note To return to the previous state, press RETURN. 3 Use the cursor keys (B / C) to select "Connection" and press ENTER. 4 Use the cursor keys (B / C) to select "Wireless" and press ENTER. 5 Use the cursor keys (B / C) to select "Share Setting" and press ENTER twice. WIRELESS Share Setting SHARE Wireless(WAC) Note When connected to a wired network, "LAN CABLE" and "Pls disconnect" appears on the front display. In this case, disconnect the network cable from the unit, and press ENTER. 16 En