Yamaha R-N803 R-N803/R-N803D Owner s Manual - Page 59

Setting tuner frequency step (TU) Configuring the system settings (ADVANCED SETUP menu) Updating the firmware (UPDATE) TU••••FM50/AM9 (Asia and General models only) Selects the step size for locating tuner frequencies. Settings FM100/AM10, FM50/AM9 (Default) Restoring the default settings (INIT) INIT••••CANCEL Restores the default settings for the unit. Choices ALL NETWORK CANCEL Restores the default settings for the unit. Initialize all of the network, Bluetooth and USB settings. When performing the initialization, the preset (p. 41) registered by NET/USB input will be cleared. Does not perform an initialization. UPDATE•NETWORK New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates. ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 1 Press SELECT/ENTER repeatedly to select "USB" or "NETWORK" and press DISPLAY to start firmware update. Choices USB NETWORK Update the firmware using a USB memory device. Update the firmware via the network. Note If the unit detects newer firmware over the network, "NEW FW Available" appears as the "Information" menu item in "Network". In this case, you can also update the unit's firmware by following the procedure in "Updating the unit's firmware via the network" (p. 54). ADVANCED OPERATION English 53 En