Yamaha R-N803 R-N803/R-N803D Owner s Manual - Page 56
Bluetooth, Volume
View all Yamaha R-N803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Configuring various functions (Setup menu) ■ Update (Network Update) Updates the firmware via the network. Perform Update Version ID Starts the process to update the unit's firmware. For details, see "Updating the unit's firmware via the network" (p. 54). Displays the version of the firmware installed on the unit. Displays the system ID number. Bluetooth Configures the Bluetooth settings. ■ On/Off Enables/disables the Bluetooth function (p. 32). Off On (Default) Disables the Bluetooth function. Enables the Bluetooth function. Immediately after selecting the "On", output of the network source is paused. ■ Standby (Bluetooth Standby) Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). If this function is set to "On", the unit automatically turns on when a connect operation (p. 32) is performed on the Bluetooth device. Off On (Default) Disables the Bluetooth standby function. Enables the Bluetooth standby function. (The unit consumes more power than when "Off" is selected.) Note This setting is not available when "Standby (Network Standby)" (p. 49) is set to "Off". YPAO Configures the setting related to YPAO. The following settings are available for each speaker system (Speaker A, Speaker B, Speaker A+B). Note The corresponding speaker system and following settings will be selectable after the YPAO measurement result is saved. ■ YPAO On/Off Enables/disables the reflection of the YPAO measurement. Off On (Default) Disables the reflection of the YPAO measurement. Enables the reflection of the YPAO measurement. ■ VOL (YPAO Volume) Enables/disables the YPAO volume function. When the YPAO Volume function is enabled, the high- and lowfrequency levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume. Off On (Default) Disables the YPAO Volume function. Enables the YPAO Volume function. Note • The YPAO Volume function is disabled when "YPAO On/Off" is set to "Off". • When the YPAO volume function is enabled, the YPAO VOL. indicator on the front display lights up. • The LOUDNESS control (p. 24) does not function when the YPAO Volume function is enabled. Volume Configures the volume-related settings. ■ Max Volume Sets the maximum volume to prevent excessive loudness. Setting range -30 dB to +15.0 dB / +16.5 dB (5 dB step) Default +16.5 dB ■ Initial Volume Sets the initial volume when the receiver is turned on. Setting range Off, Mute, -80.0 dB to +16.5 dB (0.5 dB Step) Default Off 50 En