Yamaha R-S300 Owners Manual - Page 34

Volume, FM Mode, Auto Preset, Clr All Preset, Interlock, Connect/Disconnect, Pairing - stereo receiver

Page 34 highlights

SETTING THE OPTION MENU FOR EACH INPUT SOURCE Details of the menu items are as follows. The configuration will be reflected to the input source currently selected. y The default settings are marked with "*". Volume Submenus: Adjustable range (MaxVol): Adjustable range (IniVol): MaxVol, IniVol . -30.0dB to +15.0dB, +16.5dB* (5.0 dB step) Off*, Mute, -89.5dB to +16.5dB (0.5 dB step) Sets items for volumes. MaxVol (Maximum volume) Sets the maximum volume level so that the volume will not be accidentally increased above a certain level. For example, you can adjust the volume between -89.5 dB and -5.0 dB (or Mute) when you set this parameter to "-5.0dB". The volume can be increased to the maximum level when this parameter is set to +16.5 dB (default). IniVol (Initial volume) Sets the volume at the time this unit is turned on. When this parameter is set to "Off", the volume level used when this unit was set to standby is applied. Note If "MaxVol" is set to a value lower than the "IniVol" setting, the setting for "MaxVol" overrides the "IniVol" setting. For example, if you set "MaxVol" to "-30.0dB" and "IniVol" to "0.0dB", the volume is automatically set to "-30.0dB" the next time this unit is turned on. FM Mode Choices: STEREO*, MONO Sets the FM broadcast receiving mode. "FM Mode" is displayed in the Option menu only when TUNER is selected as the input source. STEREO Receives in automatic stereo mode by priority. MONO Receives in monaural mode. You can get a better reception in monaural mode. Auto Preset Automatically detects FM radio stations and registers them as preset stations (see page 20). "Auto Preset" is displayed in the Option menu only when TUNER is selected as the input source. Clr All Preset Clears all preset stations (see page 23). "Clr All Preset" is displayed in the Option menu only when TUNER is selected as the input source. Interlock Choices: ON*, OFF When an iPhone/iPod is connected to this unit wirelessly using a Wireless System for iPod, the iPhone/iPod can be used to turn this unit on, set it to standby mode or select DOCK as the input source. "Interlock" is displayed in the Option menu only when using a Wireless System for iPod and DOCK is selected as the input source. ON This unit responds to certain iPhone/iPod operations. OFF Disables this feature. Connect/Disconnect Connects to or disconnects from a Bluetooth component (see page 28). "Connect/Disconnect" is displayed in the Option menu only when DOCK (Bluetooth) is selected as the input source. Pairing Pairs the Bluetooth Wireless Audio Receiver and a Bluetooth component (see page 27). "Pairing" is displayed in the Option menu only when DOCK (Bluetooth) is selected as the input source. 30 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

30
En
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Details of the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
y
The default settings are marked with “*”.
Volume
Sets items for volumes.
MaxVol (Maximum volume)
Sets the maximum volume level so that the volume will not
be accidentally increased above a certain level. For
example, you can adjust the volume between –89.5 dB and
–5.0 dB (or Mute) when you set this parameter to “–5.0dB”.
The volume can be increased to the maximum level when
this parameter is set to +16.5 dB (default).
IniVol (Initial volume)
Sets the volume at the time this unit is turned on. When
this parameter is set to “Off”, the volume level used when
this unit was set to standby is applied.
If “MaxVol” is set to a value lower than the “IniVol” setting, the
setting for “MaxVol” overrides the “IniVol” setting. For
example, if you set “MaxVol” to “–30.0dB” and “IniVol” to
“0.0dB”, the volume is automatically set to “–30.0dB” the next
time this unit is turned on.
FM Mode
Sets the FM broadcast receiving mode.
“FM Mode” is displayed in the Option menu only when
TUNER is selected as the input source.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (see page 20).
“Auto Preset” is displayed in the Option menu only when
TUNER is selected as the input source.
Clr All Preset
Clears all preset stations (see page 23).
“Clr All Preset” is displayed in the Option menu only
when TUNER is selected as the input source.
Interlock
When an iPhone/iPod is connected to this unit wirelessly
using a Wireless System for iPod, the iPhone/iPod can be
used to turn this unit on, set it to standby mode or select
DOCK as the input source.
“Interlock” is displayed in the Option menu only when
using a Wireless System for iPod and DOCK is selected as
the input source.
Connect/Disconnect
Connects to or disconnects from a Bluetooth component
(see page 28).
“Connect/Disconnect” is displayed in the Option menu
only when DOCK (Bluetooth) is selected as the input
source.
Pairing
Pairs the Bluetooth Wireless Audio Receiver and a
Bluetooth component (see page 27).
“Pairing” is displayed in the Option menu only when
DOCK (Bluetooth) is selected as the input source.
Submenus:
MaxVol, IniVol
Adjustable range
(MaxVol):
.
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Adjustable range
(IniVol):
Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)
Note
Choices:
STEREO*, MONO
STEREO
Receives in automatic stereo mode by priority.
MONO
Receives in monaural mode. You can get a
better reception in monaural mode.
Choices:
ON*, OFF
ON
This unit responds to certain iPhone/iPod
operations.
OFF
Disables this feature.