Yamaha R-S300 Owners Manual - Page 35

ADVANCED SETUP ADVANCED SETUP ■ ADVANCED SETUP menu parameters Change the initial settings to reflect the needs of your listening environment. y The default settings are marked with "*". APD (Automatic Power Down) TIMER Choices: 4H (4 hours), 8H* (8 hours), 12H (12 hours) When the POWER MANAGEMENT switch on the rear panel of this unit (see page 7) is set to ON, this unit automatically enters standby mode if it is not operated for the specified amount of time. Note When the POWER MANAGEMENT switch is set to OFF, "APD TIMER -OFF" is displayed. INITIALIZE Choices: NO*, YES Resets all parameters to their factory presets. • Select NO to cancel without resetting all parameters to their factory presets. • Select YES to reset all parameters to their factory presets. Note If "YES" is selected the parameters are reset the next time you turn on the power of this unit. Changing the ADVANCED SETUP menu parameters The ADVANCED SETUP menu is displayed in the front panel display. y • Audio output is muted while setting parameters in the ADVANCED SETUP menu. • While setting parameters in the ADVANCED SETUP menu, most controls on the front panel are disabled; only A (power), the INPUT selector and FM MODE/INFO are operational. A (power) FM MODE/INFO INPUT selector 1 Press and hold FM MODE/INFO on the front panel, and then press A (power) inward. This unit turns on, and the ADVANCED SETUP menu is displayed on the front panel display. 2 Rotate the INPUT selector on the front panel to select the parameter you want to change. See "ADVANCED SETUP menu parameters" on page 31 for a complete list of available parameters. 3 Press FM MODE/INFO on the front panel repeatedly to change the selected parameter setting. To change other settings, repeat steps 2 and 3. 4 Press A (power) on the front panel outward to turn off this unit to confirm your setting. Note The settings you made take effect the next time you turn on this unit. ADVANCED OPERATION 31 En