Yamaha RX V1900 Owner's Manual - Page 79
SPEAKER MENU, Choice, Subwoofers and speakers, Subwoofers, Front, speakers, Other, Descriptions
UPC - 027108930794
View all Yamaha RX V1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Customizing this unit (MANUAL SETUP) 1 SPEAKER MENU Use this feature to manually adjust the basic speaker settings. Most of the "SPEAKER MENU" parameters are set automatically when you run the automatic setup. y • Set "TEST TONE" to "ON" (page 77) to output the test tone for the "CONFIG", "LEVEL" and "DISTANCE" settings. • If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. ■ Speaker configurations A)CONFIG LFE/bass out LFE/BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. LFE signals output Choice Subwoofer(s) and speakers Subwoofer(s) Front speakers Other speakers BOTH Output No output No output SWFR Output No output No output FRONT No output Output No output Low-frequency signals output Choice Subwoofer(s) and speakers Subwoofer(s) Front speakers Other speakers BOTH *1 *2 *3 SWFR *4 *3 *3 FRONT No output *1 *3 *1 Output(s) the low-frequency signals of the front channels and other speakers set to "SMALL". *2 Always output the low-frequency signals of the front channels. *3 Output the low-frequency signals if the speakers are set to "LARGE". *4 Outputs the low-frequency signals of the speakers set to "SMALL". Measure for the speaker size The woofer section of a speaker is - 16 cm (6.5 in) or larger: large - smaller than 16 cm (6.5 in): small Front speakers FRONT SP Choice LARGE SMALL Descriptions Select this setting when the front speakers are large. Select this setting when the front speakers are small. Note When "LFE/BASS OUT" is set to "FRONT", you can select only "LARGE" in "FRONT SP". If the value of "FRONT SP" is set to other than "LARGE" in advance, this unit change the value to "LARGE" automatically. Center speaker CENTER SP Choice LARGE SMALL NONE Descriptions Select this setting when the center speaker is large. Select this setting when the center speaker is small. Select this setting when you do not use the center speaker. The center channel signals are directed to the front left and right speakers. Surround left/right speakers SUR. L/R SP Choice LARGE SMALL NONE Descriptions Select this setting when the surround speakers are large. Select this setting when the surround speakers are small. Select this setting when you do not use the surround speakers. This unit is set to the Virtual CINEMA DSP mode (page 44), and "SUR.B L/ R SP" is automatically set to "NONE". ADVANCED OPERATION English 75 En