Yamaha RX V1900 Owner's Manual - Page 81

Speaker distances Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Control step: 0.10 m (0.5 ft) Initial setting: FRONT L/FRONT R/SWFR/PRNS L/PRNS R: 3.00 m (10.0 ft) CENTER: 2.60 m (8.5 ft) SUR. L/SUR. R/SB L/SB R: 2.40 m (8.0 ft) DISTANCE Adjusted speaker FRONT L Front left speaker FRONT R Front right speaker CENTER Center speaker SUR. L Surround left speaker SUR. R Surround right speaker SB L Surround back left speaker SB R Surround back right speaker SWFR Subwoofer PRNS L Presence left speaker PRNS R Presence right speaker Notes • The available speaker channels differ depending on the "CONFIG" setting. • Instead of "SB L" and "SB R", "SUR.B" is displayed if "SUR.B L/R SP" is set to either "SMLx1" or "LRGx1". ■ Test tone D)TEST TONE Turns the test tone output on or off for the "CONFIG", "LEVEL" and "DISTANCE" settings. Choice Functions OFF This unit does not output the test tone for the "CONFIG", "LEVEL" and "DISTANCE" settings. ON This unit outputs the test tone for the "CONFIG", "LEVEL" and "DISTANCE" settings. y If you use a handheld sound pressure level meter, hold at arm's length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB. Note This function is automatically turned off if you exit from "SPEAKER MENU". Customizing this unit (MANUAL SETUP) 2 VOLUME MENU Use this menu to manually adjust the various volume settings. Adaptive dynamic range control ADAPTIVE DRC Use this feature to adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When "ADAPTIVE DRC" is set to "AUTO", this unit controls the dynamic range as follows: - If the VOLUME setting is low: the dynamic range is narrow - If the VOLUME setting is high: the dynamic range is wide Output level Output level AUTO OFF Input level VOLUME: low AUTO OFF Input level VOLUME: high Choice Functions AUTO Adjusts the dynamic range automatically. OFF Does not adjust the dynamic range automatically. y • You can also adjust the dynamic range of the bitstream signal sources by using "DYNAMIC RANGE" in "SOUND MENU" (page 79). • This function is also useful for listening with your headphones. Note The adaptive dynamic range control feature does not function when this unit is in the Pure Direct mode (page 46). Adaptive DSP level ADAPTIVE DSP LEVEL Use this feature to make fine adjustments of the DSP effect level (page 68) automatically in conjunction with the volume level. Choice Functions AUTO Adjusts the DSP effect level in conjunction with the volume level. OFF Does not adjust the DSP effect level automatically. Note Even if you set "ADAPTIVE DSP LEVEL" to "AUTO", this unit does not change but the fine-tunes the specified value of "DSP LEVEL" (page 68). ADVANCED OPERATION English 77 En