Yamaha RX V463 Owner's Manual - Page 37
Playback, Basic operations - high current
UPC - 027108929897
View all Yamaha RX V463 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
BASIC OPERATION Playback PLAYBACK Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS. Basic operations 5 Rotate IVOLUME (or press NVOLUME +/-) to adjust the volume to the desired output level. 6 Press LPROGRAM l / h repeatedly (or press 5AMP and then BPROG l / h repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display. See page 38 for details about sound field programs. 1 Turn on the video monitor connected to this unit. 2 Press JSPEAKERS repeatedly to select the front speakers you want to use. The respective speaker indicators lights up in the front panel display. 3 Press OINPUT l / h repeatedly (or press one of the input selector buttons (4)) to select the desired input source. The name of the currently selected input source appears in the front panel display for a few seconds. Available input sources MULTI CH DVR V-AUX DTV/CBL DVD MD/CD-R CD TUNER INPUT: DVD XM SIRIUS Currently selected input source 4 Start playback on the selected component or select a broadcast station. • Refer to the operating instructions for the source component. • See page 43 for details about FM/AM tuning instructions. • See page 46 for details about XM Satellite Radio tuning instructions. • See page 51 for details about SIRIUS Satellite Radio tuning instructions. Movie Dramatic Currently selected surround field program Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 34). • When PCM signals with a sampling frequency higher than 48 kHz are input, this unit is automatically set to the "STRAIGHT" mode (see page 39). • To display information about the currently selected input source in the OSD, see page 36 for details. ■ A quick guide to contents When you want to... Enjoy high quality sound Adjust the tonal quality of the front speakers Adjust the parameters of sound field programs Enjoy the sources with a wide dynamic range at night Use headphones Select a decoder to play back sources with Automatically set this unit to the standby mode See page 41 41 40 42 35 39 37 English 33 En