Yamaha RX V463 Owner's Manual - Page 43
Virtual Cinema Dsp, Silent Cinema
UPC - 027108929897
View all Yamaha RX V463 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
BASIC OPERATION ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press 5AMP and then press QSUR. DECODE repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference. Decoder Pro Logic PLII Movie PLII Music PLII Game Neural Sur. Functions Dolby Pro Logic processing for any sources Dolby Pro Logic II processing for movie sources Dolby Pro Logic II processing for music sources Dolby Pro Logic II processing for game sources Neural Surround processing for any sources Sound field programs ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers. If you set "SUR. L/R SP" to "NONE" (see page 64), Virtual CINEMA DSP is automatically activated whenever you select a CINEMA DSP program (see page 38). Note Virtual CINEMA DSP will not be activated even when "SUR. L/R SP" is set to "NONE" (see page 64) in the following cases: - when "5ch Stereo" (see page 38) is selected. - when headphones are connected to the PHONES jack. ■ Enjoying multi-channel sources and sound field programs with headphones (SILENT CINEMA) SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA is automatically activated whenever you connect headphones to the PHONES jack while listening to CINEMA DSP sound field programs (except for 5ch Stereo) (see page 38). When activated, the SILENT CINEMA indicator lights up in the front panel display. ■ Enjoying unprocessed input sources (Straight decoding mode) When this unit is in the "STRAIGHT" mode, multi-channel sources are decoded straight into the appropriate channels without any additional effect processing. 2-channel stereo sources are output from only the front left and right speakers. Press MSTRAIGHT (or press 5AMP and then press CSTRAIGHT) to select "STRAIGHT". To deactivate the "STRAIGHT" mode, press MSTRAIGHT (or press 5AMP and then CSTRAIGHT) again so that "STRAIGHT" disappears from the front panel display. English 39 En