Yamaha RX-V683 RX-V683 Quick Start Guide - Page 13

6 Connecting the power cable to an AC wall outlet, and turning on the unit Before connecting the power cable (Taiwan, Brazil and General models only) Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. 1 Plug the power cable into an AC wall outlet. VOLTAGE SELECTOR 220V240V 110V120V To an AC wall outlet VOLTAGE SELECTOR (Taiwan, Brazil and General models only) 2 Press z (receiver power) to turn on the unit. HDMI 1 2 3 4 5 V-AUX AUDIO 1 2 3 4 AV 5 1 2 TUNER BLUETOOTH USB MAIN ZONE 2 NET PARTY PHONO HDMI OUT z 3 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). The Network Setup screen shown below will be displayed on the TV when the unit is turned on for the first time after purchase. It may take several tens of seconds for the screen to be displayed (WAC: Wireless Accessory Configuration). See "Sharing the iOS device setting" under "Connecting the unit to a wireless network" in the Owner's Manual when using this function to connect the unit to a network. This document explains wireless connection using methods other than this function. Follow the procedure described under "Connecting the unit to a network" on the next page. Note This screen will not be displayed if the unit is connected to a router via its NETWORK jack (wired connection). En 13