Yamaha RX-V683 RX-V683 Quick Start Guide - Page 8
Connecting speakers/subwoofer
View all Yamaha RX-V683 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 Connecting speakers/subwoofer Positioning speakers Use the diagram as a reference for positioning speakers. * E 1 * R 2 9 3 4 10° to 30° 5 10° to 30° 8 En 1 Front speaker (L) 2 Front speaker (R) 3 Center speaker 4 Surround speaker (L) 5 Surround speaker (R) E Front presence speaker (L)* R Front presence speaker (R)* 9 Subwoofer * For 5.1.2-channel system When connecting 6-ohm speakers (U.S.A. and Canada models only) Set the unit's speaker impedance to "6 Ω MIN". For details, see "Setting the speaker impedance" in the Owner's Manual. Precautions for connecting speaker cables • Be sure that the unit and subwoofer are turned off. • Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into the unit's interior which could result in a short circuit or malfunction of the unit. • Improper connection of speaker cables could cause a short circuit resulting in damage to, or malfunctioning of, the unit or speakers. - Carefully remove approximately 10 mm (3/8") of insulation from the speakerconnection ends of the cables, and twist 10 mm (3/8") the bare wires of each speaker cable together firmly. - Do not allow the bare wires of separate speaker cables to come into contact with one another. - Do not allow speaker cable bare wires to come into contact with metal parts on the unit (rear panel and screws). If "Check SP Wires" is shown on the front display when the unit is turned on, turn off the unit and be sure that speaker cables have not caused a short circuit.