Yamaha RX V995 Owner's Manual - Page 71

REMOTE CONTROLLER English 1 TAPE/MD keys These keys control tape decks or MD recorders. The A/B/C switch (I) should be set to the "A" position to control tape decks, and "C" position for MD recorders. * The DIR A, B and A/B keys apply only to double cassette tape decks. * Pressing the DIR A key will reverse the tape direction on a single cassette tape deck with the automatic reverse function. * The and keys work as follows. For tape decks: : Rewinds a tape. : Advances a tape fast. For MD recorders: : Locates the beginning of the current or previous track. : Locates the beginning of the next track. 2 CD/DVD/LD player keys These keys control compact disc players, DVD players or LD players. Set the A/B/C switch (I) to the "A" position to control compact disc players, "B" position for DVD players and "C" position for LD players. * The DISC key is used for disc changers only. * The STOP key is used for DVD players and LD players only. 3 Tuner keys Control tuners. The A/B/C switch (I) should be set to the "A" position. +: Press this key to select the next preset station number. -: Press this key to select the previous preset station number. A/B/C/D/E: Selects the group (A - E) of preset station numbers. 4 DSP program selector keys Press a key to select a DSP program when the built-in digital sound field processor is on. Includes the Dolby Pro Logic Surround decoder, Dolby Digital decoder, and DTS decoder. 5 TEST key This key is used when adjusting the speaker balance. (Refer to pages 32 to 34.) 6 LEVEL key This key is used to adjust the output level of the center and rear speakers, and subwoofer. First, press this key (several times) to select the speaker(s). The name will be illuminated on the display. Then press the + or - keys (D) to change the output level. 7 PARAMETER/SET MENU switch Set this switch to "PARAMETER" to edit a DSP program parameter. Set to "SET MENU" to adjust or make changes in a function in the SET MENU mode. 8 SLEEP timer key Press this key to turn the built-in SLEEP timer on and off, and set the SLEEP time. (Refer to page 65.) 9 ON SCREEN display key Press this key to change the type of display on the monitor screen. Three types of displays are available. Each time the key is pressed, the information can be changed to a full, simple and no display. 0 SYSTEM POWER ON and STANDBY keys Press the SYSTEM POWER ON key to turn on the power. Press the STANDBY key to set this unit in the standby mode. A RESET button This button is inside the battery compartment. Press this button to reset the internal microcomputer for controling remote control operations. This button is used when the remote controller "freezes". * Learned functions will not be erased when this button is pressed. RESET button B MASTER VOLUME (up) and (down) keys Press these keys to increase or decrease the volume. C MUTE key Press this key to mute the volume. The volume can be returned to the original level by pressing any remote controller key which controls this unit. The indicator on the VOLUME control flashes during the mute mode. D / and -/+ keys The (up) and (down) keys change the parameters or functions according to the mode selected by the PARAMETER/SET MENU switch. The - and + keys adjust or make changes in the parameter or function. E EFFECT ON/OFF key Press this key to turn on/off the digital sound field processor, which includes the Dolby Pro Logic Surround decoder, Dolby Digital decoder and DTS decoder. F EXT. DEC. key Press this key to select the input signals from the EXTERNAL DECODER INPUT terminals as the input source. This function takes priority over the input selector key setting. "EXT. DECODER" will be illuminated on the display panel. The source selected with the input selector keys becomes the current input source when "EXT. DECODER" is not illuminated on the display panel. G Input selector keys Press a key to select the input source. H A/B/C indicators One of these indicators will turn to red depending on the position of the A/B/C switch. I A/B/C switch Normally this switch is set to the "A" position. Use the "B" position to control a Yamaha DVD player with the CD/DVD/LD player keys (2). Use the "C" position to control a Yamaha LD player with the CD/DVD/LD player keys (2), or control a Yamaha MD recorder with the TAPE/MD keys (1). J TRANSMIT/LEARN indicator This indicator will be illuminated when a key is pressed on the remote controller. (Transmitting infrared signals.) Note The functions of the keys to control other Yamaha components are the same as the corresponding keys on those components. Refer to those components' instruction manuals for details. 67