Yamaha Ri8-D Ri8-D/Ro8-D Owners Manual [English] - Page 12

Controls and Functions • Switches 5 and 6 (REMOTE) (Ri8-D only) When you plan to monitor or control the Ri8-D from a digital mixing console, these switches determine whether to use an Ri8-D-native compatible device such as CL Series or a non-Ri8-D-native device such as M7CL Series. Information on which devices feature Ri8-D-native support is available at the Yamaha pro audio website product page: http://www.yamahaproaudio.com/products/ Switch 56 Setting NATIVE Description An Ri8-D-native device will control the Ri8-D. 56 56 AD8HR A non-Ri8-D-native device will control the Ri8-D as AD8HRs. Set the UNIT ID number between 1 and F. The unit with any other UNIT ID numbers will not be controllable. INITIALIZE Initialize the settings. For details on the settings that are initialized, refer to "Initializing the Ri8-D/Ro8-D" (page 15). • Switches 7 and 8 (START UP MODE) These switches determine whether part of the internal memory is initialized when the unit starts up, or uses the previous settings (i.e., settings used prior to the most recent power-off). If you plan to connect an Ri8-D/Ro8-D-native device, such as a CL series product, set the switches to [REFRESH]. The Ri8-D/Ro8-D will not input or output audio until the connected Ri8-D/Ro8-D-native device transmits its settings to the Ri8-D/Ro8-D, so that the Ri8-D/Ro8-D will not output audio accidentally. Switch 78 Setting Description REFRESH The Ri8-D/Ro8-D starts up with part of the internal memory initialized. The following settings are initialized. HA GAIN +48V HPF HPF FREQ Gain Compensation -6 dB OFF OFF 80Hz OFF 78 RESUME The unit starts up using the settings assigned prior to the most recent power-off. 0 [+48V MASTER] Switch (Ri8-D only) This is the master switch for the unit's +48V phantom power supply. If the [+48V MASTER] switch is off, no phantom power will be supplied to the unit's input connectors even if the individual input phantom power settings are ON. In this case, the [+48V] indicators will flash on channels for which phantom power is turned ON. A Power Indicator Lights when AC power to the unit is ON. B Power Switch ( ) Turns power to the unit ON or OFF. CAUTIONS: • Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for about 6 seconds before turning it on again. • Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. 12 Owner's Manual