Yamaha Ri8-D Ri8-D/Ro8-D Owners Manual [English] - Page 21

English Deutsch Français Specifications Specifications General Specifications Sampling Frequency Signal Delay Frequency Response Total Harmonic Distortion*2 Hum&Noise*3 Dynamic Range Crosstalk@1kHz Dimensions (WxHxD) and Net Weight Power Requirements (wattage) Power Requirements (voltage and hertz) Temperature Range Included Accessories 44.1kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm External 48kHz +4.1667%, +0.1%, -0.1%, -4.0% 88.2kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm ±200ppm 96kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm Less than 3ms INPUT to OUTPUT*1, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs= 48kHz +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT*1, Fs= 44.1kHz, 48kHz +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT*1, Fs= 88.2kHz, 96kHz Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs= 44.1kHz, 48kHz Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs= 88.2kHz, 96kHz INPUT to OUTPUT*1, Input Gain= Min. -128dBu typ., Equivalent Input Noise, Input Gain= Max. -88dBu Residual output noise, ST master off. 112dB typ., DA Converter, 108dB typ., INPUT to OUTPUT*1, Input Gain= Min. -100dB*4, adjacent INPUT/OUTPUT channels, Input Gain= Min. Ri8-D: Ro8-D: 480mm x 44mm x 362mm, 4.5kg 480mm x 44mm x 359mm, 4.4kg Ri8-D: Ro8-D: 35W 35W US/Canada: 120V 60Hz Japan: 100V 50/60Hz China: 110-240V 50/60Hz Korea: 220V 60Hz Other: 110-240V 50/60Hz Operating temperature range: 0 - 40°C Storage temperature range: -20 - 60°C Owner's Manual, Power Cord *1. INPUT to OUTPUT means Ri8-D INPUT to Ro8-D OUTPUT *2. Total Harmonic Distortion is measured with 18dB/octave filter @80kHz *3. Hum & Noise are measured with A-Weight filter. *4. Crosstalk is measured with a 30dB/octave filter @22kHz Español Português Italiano Ё᭛ Owner's Manual 153