Yamaha SLG200 SLG200_Owners Manual - Page 10
Power Supply
View all Yamaha SLG200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Power Supply The Silent Guitar can operate either with the power adaptor or batteries as its power source. Make sure that the power is switched OFF on the Silent Guitar when preparing the power supply. Using Batteries 1. Press the release lever in the direction indicated on the battery case to release the lock, then pull out the battery holder. 2. Install two AA alkaline or NiMH batteries into the holder mak- ing sure their polarities are aligned as shown in the illustration inside the holder. (See illustration) 3. Slide the battery holder into the battery case. Push firmly until the case locks in place. Battery Holder l When to Change Batteries The triangles in the display flash alternately ( ) when battery power becomes low. Change the batteries as soon as possible. The device may not operate properly due to the discharg- ing characteristics of some NiMH batteries. Release Lever AA battery x2 WARNING • Always replace both batteries at the same time. Never mix new and old batteries, battery types/models, or batteries from different manufacturers. Doing so can cause leakage, overheating, and rupture. • Do not incinerate or dismantle the battery. • When using NiMH batteries, take care not to damage the battery casing or poles when installing and removing the batteries. • If the battery leaks, avoid contact with the leaked fluid. If the fluid should come into contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. • Please observe all local laws, rules, etc. when disposing the batteries. Powering with AC Current Please purchase a power adaptor. (Compatible power adaptors: PA-3C, PA-130(A, B)) 1. Plug the adaptor's DC output cable into the Silent Guitar's DC IN jack, making sure the plug is firmly inserted into the jack. 2. Plug the AC adaptor into a convenient wall AC power socket. WARNING When using an AC adaptor, make sure you use only one of the following recommended adaptors (Recommended Adaptors: PA-3C, PA-130(A, B)). The use of any other adaptor may result in damage to the instrument or cause fire, etc. Please use with caution. CAUTION Battery power is automatically disconnected when the AC adaptor is connected. When the AC adaptor is used, the batteries may leak. To prevent leakage we recommend that you remove the batteries from the instrument. When the AC adaptor is used. 10