Yamaha SLG200 SLG200_Owners Manual - Page 12

About the Auto Power Off Function To prevent unnecessary power consumption, the instrument is equipped with an Auto Power Off Function that automatically switches the power off if the instrument has not been played for more than 30 minutes. If the Auto Power Off function switches the instrument's power OFF, simply press the power switch again to continue using the instrument. * The Auto Power OFF function is enabled when shipped from the factory. l Confirming the Auto Power Off Function's Enabled/Disabled Status • When the Auto Power Off Function is enabled, the instrument will directly enter the Play mode (LEDs do not flash) when switching the power ON (press the power switch or connect a cable to the LINE OUT jack). Play Mode
Lights • When the Auto Power Off Function is disabled all Tuner LEDs will light then go out one by one before entering the Play Mode when switching ON the power. Play Mode

l Changing the Auto Power Off Function Enabled/Disabled Setting With the power switched ON (Play Mode), press and hold the TUNER switch for more than two seconds to enable the function. • Performing the operation described above when the function is enabled will cause all tuner LEDs to light and then turn off one by one and disable the function. Play Mode
Auto Power Off
Function disabled • Performing the operation described above when the function is disabled will cause the tuner LEDs to light one by one and enable the function. Play Mode
Auto Power Off
Function enabled 12