Yamaha SLG200 SLG200_Owners Manual - Page 7
Rear Electronics When connecting the instrument to external audio equipment
View all Yamaha SLG200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
l Rear Electronics Section To Power Outlet Nomenclature Power Adaptor (sold separately) Power Adaptor Jack Battery Case Control Panel AUX IN Jack (Stereo Mini) PHONES Jack (Stereo Mini) CD Player Portable Music Player Metronome LINE OUT Jack (Monaural) * Connecting/disconnecting a cable to the LINE OUT jack switches the power ON/OFF. • Insert plug → power ON • Disconnect plug → power OFF Guitar Amp Powered Speaker Recording Equipment Mixer, etc. Stereo Inner Earphones Stereo Headphones * Do not connect anything other than a pair of headphones or inner earphones to the PHONES jack. Doing so can cause failure. When connecting the instrument to external audio equipment, check the jack size and make sure to use a plug size that corresponds to the jack being used, and properly connect the cable to the jack. CAUTION • Before connecting the Silent Guitar to any external equipment, make sure the power is switched OFF or the volume is fully lowered on all devices. Failure to do so can result in a loud sound that can damage equipment or your hearing. • Never return the signal sent from Silent Guitar's outputs directly, or via an external device to the AUX IN jack. Doing so can result in a feedback loop that may result in damaging the instrument's electronics. • Never play at high volume for any extended period of time when using the inner earphones or headphones. Doing so can permanently damage your hearing. 7