Yamaha SU200 Owner's Manual - Page 12
Power connections - power supply
View all Yamaha SU200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Power connections While the SU200 can run from either an optional AC adaptor or batteries, Yamaha recommends use of the more environmentally safe AC adaptor. Follow the instructions below according to the power source you intend to use. Using an Optional AC Power Adaptor Z Make sure that the SU200's STANDBY/ON switch is set to STANDBY. X Connect the optional AC adaptor (PA-3B or other adaptor specifically recommended by Yamaha) to the power supply jack. C Plug the AC adaptor into an AC outlet. STANDBY DC IN ON X PA-3B AC outlet C To disconnect the adaptor: Set the STANDBY/ON switch to STANDBY, then unplug the adaptor from the AC outlet, and then disconnect it from the SU200 power supply jack. WARNING • Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your instrument from a standard electrical outlet. The use of other adaptors may result in irreparable damage to both the adaptor and the SU200. • Unplug the AC Power Adaptor when not using the SU200, or during electrical storms. Using Batteries Z Open the battery compartment cover located on the instrumentís bottom panel. X Insert six new batteries, being careful to follow the polarity markings on the inside of the compartment. C Replace the compartment cover, making sure that it locks firmly in place. 12 Power connections