Yamaha SU200 Owner's Manual - Page 33

ENGLISH q If pad 1 is set to 2bar while pad 2 is still set to 1bar: Pad 1 Pad 2 Loop 1 Loop 1 Loop 2 Loop 2 Loop 3 Loop 4 You can change the bar-length setting from Pad-Play mode; simply select the pad and then press [-1/NO] or [+1/YES] to switch the setting. Note that the bpm (beats-per-minute) setting changes accordingly. bpm 70 1bar -1/NO bpm140 2bar +1 / Y E S Try changing some of the bar settings. Press the [LOOP TR PLAY] button after making each change, so that you can hear how the sound changes. NOTE • You cannot convert from 1-bar to 2-bar if the 1-bar sample has a bpm above 115. You cannot convert from 2-bar to 1-bar if the 2-bar sample has a bpm lower than 120. Switching an effect to a different pad without changing the playback state To switch the effect to a different pad during Loop-Track Play without changing the playback state, hold down the [HOLD] button and press the pad that you want to move the effect to. Note that in this case the pad press will have no effect on the playback state of the pad's sample (does not switch muting off or on, etc.). For more information, see page 36. Controlling Loop-Track Play from a MIDI device Z Connect a MIDI device (such as a sequencer or keyboard) to the SU200. Switch on the power to the MIDI device and the SU200. Sequencer MIDI OUT MIDI IN PHONES MIC INPUT LINE INPUT L R SU200 STEREO OUTPUT L R EFFECT TYPE LOOP REMIX SLICE TECHMOD DIST/LO-FI D E L AY FILTER 3.3V CARD TYPE TYPE LFO LO-FI DELAY LEVEL RESONANCE MIDI IN VARI GAT E TIME MOD SPEED DRIVE TIME CUTOFF D ATA REC TRGLVL DC IN STANDBY ON 8888888 SAMPLING UNIT Select BANK A C PAD PLAY Play PAD 1 8 LOOP TRACK PLAY Press LOOP TR PLAY Button Play PAD 1 8 Select EFFECT LOOP REMIX Turn KNOB 1,2 EFFECTS under the knobs VOLUME 1 EFFECT CONTROL 2 LOOP REMIX SLICE TECH MOD JOB BANK EXIT BANK -1/NO +1 / Y E S BPM BANK LOOP TR P L AY RESMPL DIST/ LO-FI D E L AY REC S TA R T STOP FILTER G AT E TRIGGER ONE SHOT LOOP STEREO/MONO GRADE NORMAL R E V E R SE S TA R T POINT END POINT POINT CLEAR DELETE EXTRACT TIME S C R AT C H SCALE TIME STRETCH COPY PA D PAD VOL S AV E LOAD CARD DELETE MIDI MIDI keyboard SU200 PHONES MIC INPUT LINE INPUT L R STEREO OUTPUT L R EFFECT TYPE LOOP REMIX SLICE TECHMOD DIST/LO-FI D E L AY FILTER 3.3V CARD TYPE TYPE LFO LO-FI DELAY LEVEL RESONANCE MIDI IN VARI GAT E TIME MOD SPEED DRIVE TIME CUTOFF D ATA REC TRGLVL DC IN STANDBY ON C CS6x, etc. MIDI OUT MIDI IN 8888888 SAMPLING UNIT Select BANK A C PAD PLAY Play PAD 1 8 LOOP TRACK PLAY Press LOOP TR PLAY Button Play PAD 1 8 Select EFFECT LOOP REMIX Turn KNOB 1,2 EFFECTS under the knobs VOLUME 1 EFFECT CONTROL 2 LOOP REMIX SLICE TECH MOD JOB BANK EXIT BANK -1/NO +1 / Y E S BPM BANK LOOP TR P L AY RESMPL DIST/ LO-FI D E L AY REC S TA R T STOP FILTER G AT E TRIGGER ONE SHOT LOOP STEREO/MONO GRADE NORMAL R E V E R SE S TA R T POINT END POINT POINT CLEAR DELETE EXTRACT TIME S C R AT C H SCALE TIME STRETCH COPY PA D PAD VOL S AV E LOAD CARD DELETE MIDI X Enter Job mode and set the MIDI clock setting to EXT (external). (See page 39.) C Start Loop-Track Play. q If using a sequencer (such as the Yamaha RMIx): SU200 starts Loop-Track Play automatically when the RMIx starts pattern play. The Loop-Track Play is synchronized with the RMIx tempo. q If using a MIDI keyboard (such as the Yamaha CS6x): Press the SU200's [LOOP TR PLAY] button while using the CS6x arpeggiator. The SU200 will start Loop-Track Play in sync with the tempo from the CS6x. V Stop Loop-Track Play. q If using a sequencer (such as the Yamaha RMIx): Stop the RMIx pattern. Loop-Track Play stops automatically. q If using a MIDI keyboard (such as the Yamaha CS6x): Press the SU200's [LOOP TR PLAY] button a second time. Chapter 2 Playing the Pads 33