Yamaha SU200 Owner's Manual - Page 13
Switching On the Power
View all Yamaha SU200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH NOTE • When the batteries need to be replaced, "Battry Low" may appear on the display, the volume may be reduced, the sound may be distorted, and other problems may occur. When this happens, turn the power off and replace the batteries. • Even if batteries are installed, the SU200 will automatically switch to AC power when the AC adaptor is connected. • To conserve battery life, the display's backlight remains off when the SU200 is running on batteries. CAUTION • When the batteries run down, replace them with a complete set of six new batteries. NEVER mix old and new batteries. • Do not use different kinds of batteries (e.g. alkaline and manganese) at the same time. • If the instrument is not to be in use for a long time, remove the batteries from it, in order to prevent possible leakage of battery fluid. Switching On the Power Z Make the necessary connections. Connect up headphones or an output audio device. (See page 10.) X Lower the volume settings on the SU200 and the audio device. C Press the STANDBY/ON switch to set the power ON. The SU200 displays YAMAHA SU200 and then enters Pad-Play mode (see page 15). STANDBY ON CAUTION • Note that a samll amout of current continues to flow even while the switch is in the STANDBY position. If you are going to leave the SU200 unused for a prolonged period, be sure to disconnect the adaptor and (if batteries are installed) remove the batteries. V Adjust the volume by turning the VOLUME knob. Also adjust the volume at the external audio device. VOLUME B When you are ready to turn off the SU200: Switch off the power to the output audio device (or lower its volume) before switching off the SU200. Power connections 13