Yamaha SW-3 Owner's Manual - Page 7

English If your amplifier has two sets of speaker terminals Right speaker A B Amplifier (Both "A" and "B" outputs must be ON.) Left speaker This unit STANDBY-RED ON-GREEN POWER OFF ON HIGH CUT 50 Hz 150 Hz AUTO POWER ON OFF INPUT2 VOLUME 0 10 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS INPUT2 INPUT1 FROM AMPLIFIER To AC outlet OUTPUT TO SPEAKERS Connecting to this unit's OUTPUT/INPUT terminals For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and - markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers. * Banana Plug connections are also possible. Simply insert the Banana Plug connector into the corresponding terminal. How to Connect: Red: positive (+) Black: negative (-) 2 1 3 1 Unscrew the knob. 2 Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] 3 Tighten the knob and secure the wire. 7