Yamaha V2075 RX-V3075/V2075 Owners Manual - Page 114
Level, Parametric EQ, Test Tone, Set Parametric EQ to Manual and press ENTER.
View all Yamaha V2075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
■ Level Adjusts the volume of each speaker. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2 Setting range -10.0 dB to +10.0 dB (0.5 dB increments) Default 0.0 dB Adjusting while viewing the front display a Press LEVEL. b Use the cursor keys (q/w) to select a speaker. c Use the cursor keys (e/r) to adjust the volume of the selected speaker. ■ Parametric EQ Adjusts the tone with an equalizer. Settings Manual YPAO:Flat YPAO:Front YPAO:Natural Through Select this option when you want to adjust the equalizer manually. For details, see "Manual equalizer adjustment". Adjusts individual speakers to achieve the same characteristics. Adjusts individual speakers to achieve the same characteristics as the front speakers. Adjusts all speakers to achieve a natural sound. Does not use the equalizer. • "YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto Setup" have already been saved (p.50). Press ENTER again to view the measurement results. ■ Manual equalizer adjustment 1 Set "Parametric EQ" to "Manual" and press ENTER. 2 Press ENTER again to enter the edit screen. 3 Use the cursor keys to select a speaker and press ENTER. • To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK". • To copy the parametric equalizer values acquired with "Auto Setup" (p.50) to the "Manual" fields for fine adjustment, select "PEQ Data Copy" and then an equalizer type. 4 Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for subwoofer) and the cursor keys (q/w) to adjust the gain. Setting range Gain: -20.0 dB to +6.0 dB 5 To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item. Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain. Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain. Setting range Center frequency: 31.3 Hz to 16.0 kHz (31.3 Hz to 250.0 Hz for subwoofer) Q factor: 0.500 to 10.080 6 To exit from the menu, press ON SCREEN. ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off (default) On Does not output test tones. Outputs test tones automatically when you adjust the speaker balance or equalizer. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 114