Yamaha V3.0 CISSCA V3.0 Users Manual - Page 22
Lo-Z/HI-Z Tap: Selects the tap.
View all Yamaha V3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2-7. Viewing Results On this screen, you can view a sound pressure distribution map created based upon the specified conditions. You can update the map by changing measurement conditions such as the speaker output settings and the measurement frequency. View results The sound pressure (intensity) is represented using different colors on the color bar shown on the right of the map. You can see that it is highest near the speaker, and decreases as you move away from it. This is the sound pressure when the wattage selected in the currently selected speaker output settings (Lo-Z/Hi-Z Tap) is output. The color bar indicates how the colors are mapped to sound pressure. The target mark shown on the right side of the bar indicates the target sound pressure set in the application. The arrow indicates the maximum sound pressure in the current speaker output settings. These are also shown numerically next to Result (calculated result) and Target (target sound pressure) on the right side of the screen. The measurement frequency is usually based on the Overall+A weighted (overall bandwidth with A characteristic curve correction) setting, but you can also change this. If you select a different frequency, the Result and Target numeric displays will not be shown. If SPL on/off (sound pressure map display option) is set to ON, the sound pressure colors and values that are used in the map are indicated on the right side of the screen. The specified target sound pressure is also indicated. The table on the right side of the screen (dBA SPL or dB SPL) indicates the sound pressure distribution ratios in the room at 6 dB intervals. ・ Speaker List: A list of speakers used in the calculation. You can temporarily exclude speakers from the sound pressure calculation by clicking the eye icon shown on the left of each speaker name. This is also reflected in reports. ・ Frequency: The frequency band used for the sound pressure calculation can be selected. The default setting is overall bandwidth with A curve weighting (Overall A-Weighted). Other available settings are overall bandwidth (Overall Flat), Low (125-500 Hz), Mid (500 Hz-2 kHz), and High (2 kHz-8 kHz). If you change a parameter, the software recalculates and redraws the map. ・ Lo-Z/HI-Z Tap: Selects the tap. The software recalculates the sound pressure distribution based upon the selected values. 22