Yamaha WX-010 WX-010 Owners Manual - Page 17

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (smartphone, digital audio player, etc.). Please also refer to the owner's manual of your Bluetooth device. • Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP compatible smartphone, digital audio player, etc.) within a direct line-of-sight distance of 10 m (33 ft). • Make sure there are no obstacles between this unit and the Bluetooth device. Pairing this unit with your Bluetooth device ■ Pairing (Registration) " (power)/CONNECT " Power indicator 4 " Turn on the unit. The power indicator lights. # On your connecting device (mobile device), set Bluetooth to on. $ Perform Bluetooth pairing on the connecting device. For details, refer to the owner's manual of the connecting device. % From the Bluetooth connection list of the connecting device, choose this unit (the Room name of this unit ☞ P.10). y • Finish the operation from turning on the unit to completing pairing in 5 minutes. • If you are asked to enter a password, enter the numerals "0000." ------- The unit's Room name is displayed where "-------" is indicated above. Note Check that the pairing process on the connecting device has been completed. If the pairing process fails, start over from step #. For details, see the connecting device's owner's manual. Connecting an already-paired device via Bluetooth ■ Connecting from the connecting device " In the Bluetooth settings of the connecting device, turn Bluetooth on. # From the Bluetooth connection list of the connecting device, choose this unit (the Room name of this unit ☞ P.10). The Bluetooth connection will be established, and the Bluetooth indicator will light. Disconnecting a Bluetooth connection If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth connection will be disconnected. • Tapping (power)/CONNECT to enter standby. • Touching and holding for 3 seconds. • Disconnecting the Bluetooth connection from the connecting device. 12