Yamaha WX-010 WX-010 Owners Manual - Page 25

TROUBLESHOOTING Bluetooth Problem Cause Solution Cannot make this unit paired with The connecting device does not support A2DP. Perform pairing operations with a device which the connecting device. supports A2DP. The passkey of the devices, such as a Bluetooth Use a connecting device with a passkey "0000." adaptor, that you want to pair with this unit is other than "0000." This unit and the connecting device are too far Move the connecting device closer to this unit. apart. There is a device (microwave oven, wireless Move this unit away from the device that is emitting network, etc.) that outputs signals in the 2.4 GHz radio-frequency signals. frequency band nearby. The unit is in standby. Turn the unit on and perform pairing (☞ P.12). Another Bluetooth device is connected. Terminate current Bluetooth connection, and perform pairing with the new device. The Bluetooth function of the unit is disabled. Enable the Bluetooth function of the unit (☞ P.16). Cannot establish a Bluetooth connection. This unit is not registered on the connecting device's Bluetooth connection list. Perform pairing operations again (☞ P.12). The unit is in Eco Standby. Turn the unit on, then establish a Bluetooth connection (☞ P.12). Another Bluetooth device is connected. Terminate current Bluetooth connection, then establish a Bluetooth connection with that device again. The Bluetooth function of the device is turned Turn on the Bluetooth function of the device. off. The pairing information has been deleted. Delete any pairing history of WX-010 on the Bluetooth device, then pair with the WX-010 again (☞ P.12). No sound is produced or the sound is interrupted during playback. The Bluetooth connection of this unit with the connecting device is disconnected. This unit and the connecting device are too far Perform Bluetooth connection operations again (☞ P.12). Move the connecting device closer to this unit. apart. There is a device (microwave oven, wireless Move this unit away from the device that is emitting network, etc.) that outputs signals in the 2.4 GHz radio-frequency signals. frequency band nearby. The connecting device's Bluetooth function is Turn on the Bluetooth function of the connecting off. device. The connecting device is not set to send Check that the Bluetooth function of the connecting Bluetooth audio signals to this unit. device is set properly. The pairing setting of the connecting device is Set the pairing setting of the connecting device to this not set to this unit. unit. The connecting device's volume is set to the Increase the volume level. minimum. The connecting device is connected to more than Select this unit as a playback device for the two Bluetooth devices and this unit (WX-010) is connecting device. not selected as a playback device. 20