Yamaha YAS-201 Owners Manual - Page 6

Installations Place the sound bar on a flat surface such as on top of a TV cabinet. Place the subwoofer to the outside of the sound bar. To reduce echoes from the wall, face the front side of the subwoofer slightly inward. Removing the stands When the sound bar blocks the view of the lower part of the TV screen or the remote control sensor of the TV, remove the stands (18 mm [3/4"]) of the sound bar to adjust its height. HINT • Use the TV Remote Repeater function (p.11) to transmit TV remote control signals via the sound bar. 1 Attach the mounting template on a wall and mark for the screw holes. Tapes or thumbtacks Mounting template (supplied) Screw holes 2 Remove the mounting template from the wall and install the commercially available screws at the marks on the wall. NOTE • Keep the stands and screws in a safe place for future use. Attaching the sound bar to a wall 7 to 8.5 mm (1/4" to 3/8") 2 to 4 mm (1/16" to 3/16") 4 mm (#8) 20 mm (3/4") or more 3 Hang the sound bar on the screws. Mounting holes on rear of sound bar Cautions • Do not place the sound bar on/under any other devices such as BD player in a pile. Doing so may cause a malfunction due to vibrations. • Do not touch the grille on the front and bottom of the sound bar. • Place the sound bar away from your TV more than 50 mm (2") so as not to damage your TV with rear panel of the sound bar. • Depending on your installation environment, it may be better to connect the sound bar and external devices (such as a TV) before installing the sound bar. Cautions • When installing the sound bar on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the sound bar to fall, resulting in personal injury. • Do not attach the sound bar to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the sound bar to fall. • Make sure you use commercially available screws that can support the weight of the installation (specified in Step 2). Using clamps other than specified screws, such as short screws, nails, and two-sided tape, may cause the sound bar to fall. D TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME DTS PL SUBWOOFER INPUT - VOLUME + Cautions • Fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the sound bar may fall. • Check that the sound bar is fixed securely after the installation. Yamaha will bear no responsibility for any accidents caused by improper installations. 6