Yamaha YAS-201 Owners Manual - Page 9

(power) key Turns on or off (standby) the sound bar. HINT • If you turn on the sound bar, the sound bar and subwoofer will be connected wirelessly and the SUBWOOFER indicator on the front panel of the sound bar will light up. If the indicator does not light up (or remains flashing), change the group ID (p.11). SUBWOOFER Flashes (preparing) SUBWOOFER Lights up (connection established) SURROUND and STEREO keys Switch between surround and stereo (2 channel) playback. When surround playback is selected, you can enjoy a realistic sound effect using Yamaha's exclusive AIR SURROUND XTREME. SURROUND Lights up (surround playback) SURROUND Off (stereo playback) HINT • When 2-channel stereo signals are played in surround, the PLII indicator lights up. PL Lights up (Dolby Pro Logic II) MUTE key Mutes the audio output. Press the key again to unmute. Flashes (on mute) CLEAR VOICE key Enables/disables the clear voice function. When this function is enabled, you can enjoy clear voice sounds while watching movies, TV dramas, news programs or sports programs. CLEAR VOICE Lights up (clear voice is enabled) UNI VOLUME key Enables/disables the UniVolume function. When this function is enabled, the sound bar automatically adjusts its volume so that different TV channels, programs and commercials will be played at the same volume. UNI VOLUME Lights up (UniVolume is enabled) HINT • The UniVolume function is automatically disabled when "YIT" is selected as the input source. AUDIO DELAY key Adjusts the audio delay to synchronize the sound with the video when the video image on the TV may seem delayed with respect to the sound. Follow the procedure below to adjust the audio delay. 1 Hold down AUDIO DELAY for more than 3 seconds. The left most indicator flashes. Decoder indication The sound bar supports the following audio signals. You can check the type of the input audio signal by the color of the indicator. D DTS Green (Dolby Digital), Red (DTS Digital Surround) D DTS Off (PCM) Auto-sleep function The sound bar will be automatically turned off when one of the following conditions is met. • No operations for 12 hours • No audio input and no operations for 1 hour • No operations for 10 seconds after a wireless connection (yAired) to a transmitter (sold separately) is terminated 2 Press SUBWOOFER to adjust the audio delay. Smaller delay (-) Larger delay (+) 3 To finish the adjustment, press AUDIO DELAY. HINT • The adjustment will be finished automatically if no operations are performed for 20 seconds. • The audio delay setting does not work when "YIT" is selected as the input source. 9