Yamaha YDP-101 Owner's Manual - Page 36

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI

Page 36 highlights

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number GRAND PIANO E.PIANO HARPSICHORD STRINGS PIPE ORGAN P.C.#=Program Change number Normal Voice VARIATION Voice MSB LSB P.C.# MSB LSB P.C.# 0 112 0 0 113 0 0 112 5 0 112 88 0 112 6 0 115 6 0 112 48 0 113 49 0 112 19 0 113 19 • When program change is turned OFF in the Function mode, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received. 5. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data F8H FAH FCH FEH Transmission Transmitted every 96 clocks Recorder start Recorder stop Transmitted every 200 milliseconds Reception Received as 96-clock tempo timing when MIDI clock is set to External Recorder start Not received when the MIDI clock is set to Internal. Recorder stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received. • Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs. 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Panel Data Transmit Data format: [F0H] -> [43H] -> [0nH] -> [7CH F7H] F0H, 43H, 0nH, 7CH (n: channel number) 00H, 2CH (data length) 43H, 4CH, 20H, 20H (CL) 43H, 4CH, 50H, 27H, 39H, 38H (Model ID) 30H, 30H (version x, y) [PANEL DATA] [CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end) F7H (end of exclusive) • Panel Data Contents (1) 1'st Voice (2) Dual On/Off (3) Dual Voice (4) Dual Balance (5) Dual Detune (6) Dual Voice1 Octave (7) Dual Voice2 Octave (8) - (9) - (10) - (11) - (12) - (13) - (14) - (15) - (16) - (17) - (18) - (19) Reverb Type 1 (20) Reverb Type 2 (21) Reverb Depth1 (22) Reverb Depth2 (23) - (24) - (25) - (26) Variation 1 On/Off (27) Variation 2 On/Off (28) Touch Sensitivity (29) Fixed Data (30) Left Pedal Function (31) Absolute tempo low byte (32) Absolute tempo high byte • "-" indicates no affect. • Panel data send requests cannot be received. 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [ll H] -> [mmH] -> [F7H] MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume ll H = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = don't care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume ll H = Volume LSB mmH = Volume MSB F7H = End of Exclusive 36 YDP-101 124

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

36
YDP-101
MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI
4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data
Transmission
Reception
F8H
Transmitted every
Received as 96-clock tempo timing
96 clocks
when MIDI clock is set to External
FAH
Recorder start
Recorder start
Not received when the MIDI clock
is set to Internal.
FCH
Recorder stop
Recorder stop
Not received when the MIDI clock
is set to Internal.
FEH
Transmitted every
If a signal is not received via MIDI
200 milliseconds
for more than 400 milliseconds, the
same processing will take place for
All Sound Off, All Notes Off and
Reset All Controllers as when those
signals are received.
Caution: If an error occurs during MIDI reception, the Damper, Sostenuto,
and Soft effects for all channels are turned off and an All Note Off occurs.
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->
[F7H]
F0H, 43H, 0nH, 7CH
(n: channel number)
00H, 2CH
(
data length
)
43H, 4CH, 20H, 20H
(CL)
43H, 4CH, 50H, 27H, 39H, 38H
(Model ID)
30H, 30H
(version x, y)
[PANEL DATA]
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+
......
+Data end)
F7H
(end of exclusive)
When program change is turned OFF in the Function mode, no
program change data is transmitted or received.
Also, Bank MSB/LSB is not transmitted or received.
Normal Voice
VARIATION Voice
MSB
LSB
P.C.#
MSB
LSB
P.C.#
GRAND PIANO
0
112
0
0
113
0
E.PIANO
0
112
5
0
112
88
HARPSICHORD
0
112
6
0
115
6
STRINGS
0
112
48
0
113
49
PIPE ORGAN
0
112
19
0
113
19
P.C.#=Program Change number
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1)
Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[
ll
H] -> [mmH] -> [F7H]
MIDI Master Volume
Simultaneously changes the volume of all channels.
When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H
= Exclusive status
7FH
= Universal Realtime
7FH
= ID of target device
04H
= Sub-ID #1=Device Control Message
01H
= Sub-ID #2=Master Volume
ll
H
= Volume LSB
mmH
= Volume MSB
F7H
= End of Exclusive
or
F0H
= Exclusive status
7FH
= Universal Realtime
XnH
= When n is received n=0~F, whichever is received.
X = don’t care
04H
= Sub-ID #1=Device Control Message
01H
= Sub-ID #2=Master Volume
ll
H
= Volume LSB
mmH
= Volume MSB
F7H
= End of Exclusive
(1) 1'st Voice
(2) Dual On/Off
(3) Dual Voice
(4) Dual Balance
(5) Dual Detune
(6) Dual Voice1 Octave
(7) Dual Voice2 Octave
(8) —
(9) —
(10) —
(11) —
(12) —
(13) —
(14) —
(15) —
(16) —
(17) —
(18) —
(19) Reverb Type 1
(20) Reverb Type 2
(21) Reverb Depth1
(22) Reverb Depth2
(23) —
(24) —
(25) —
(26) Variation 1 On/Off
(27) Variation 2 On/Off
(28) Touch Sensitivity
(29) Fixed Data
(30) Left Pedal Function
(31) Absolute tempo low byte
(32) Absolute tempo high byte
• “
” indicates no affect.
• Panel data send requests cannot be received.
• Panel Data Contents
124