Yamaha YST-SW200 Owner's Manual - Page 5

CONNECTIONS • Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made. • When making connections between this unit and other components, be sure all connections are made correctly and consistently, that is to say L (left) to L, R (right) to R, "+" to "+" and "-" to "-". • This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of the ways shown below according to your audio system. Also, refer to the owner's manual for each component to be connected to this unit. CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER • Disconnect your main speakers from the amplifier and connect them to this unit. • To connect this unit to the amplifier, use the provided speaker cords. If using one YST-SW200 Right speaker Left speaker This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV Amplifier To AC outlet If using two YST-SW200s Right speaker Left speaker This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS INPUT2 PHASE FROM AMPLIFIER INPUT1 NOM REV Amplifier This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV To AC outlet To AC outlet 5