Yamaha YST-SW200 Owner's Manual - Page 7

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER • Leave the main speakers connected to the amplifier. • Line output terminals may be labeled PRE OUT, REC OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select an alternative method of connection. If using one YST-SW200 Right speaker This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV Left speaker Amplifier To AC outlet Pin plug cords PRE OUT If using two YST-SW200s Right speaker OUTPUT TO SPEAKERS INPUT2 PHASE This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV FROM AMPLIFIER INPUT1 NOM REV This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV Left speaker Pin plug cords Amplifier PRE OUT To AC outlet To AC outlet Notes • When connected to the REC OUT terminals, if the amplifier has a REC OUT selector, be sure to set it for the correct source. For information on its operation, consult the amplifier's owner's manual. • When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound. • When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal. 7