Yamaha YST-SW200 Owner's Manual - Page 6

If your amplifier has two sets of speaker terminals Right speaker This unit OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT1 INPUT2 PHASE NOM REV Left speaker To AC outlet A B Amplifier (Both " A"and " B" outputs must be ON.) Connecting to this unit's OUTPUT/INPUT terminals For connections, use speaker wires of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and - markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers. * Banana Plug connections are also possible (except for Europe model). Simply insert the Banana Plug connector into the corresponding terminal. How to Connect: Red: positive (+) Black: negative (-) 2 1 3 Œ Unscrew the knob.  Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] Ž Tighten the knob and secure the wire. 6